0.027" Aluminum Drip Edge with Kick

FED-02
$18.95
In stock
1
Product Details
Brand: K&M Sheet Metal
leadtime: 5
Shipping: This Item Requires a Skid and Freight Shipping.
Freight Delivery: Customer is responsible for unloading materials from the truck. *Residential delivery may be limited. Please Call before placing and order if your delivery address is difficult for a Semi-Truck to get to.

L Shape Roof Drip Edge Flashing Metal - 10' Length

Edge metal used on rubber, tile, slate and shingle roofs. Available in several colors. 0.027" Aluminum

This simple drip edge profile, also known as "baldy cleat" is used on rubber roofs, slate and shingle roofs. It can be used to help direct water towards a gutter for example.
The name drip edge comes from the kick portion of this profile, at the very bottom, responsible for kicking the water away from the fascia board. That portion is essentially a drip edge.
Other common names for our drip edge profiles include 2"x2" drip edge, 3"x3" drip edge, etc.
You may order custom profiles through this page, browse our store for other profiles or send us an email for a quote on something even more intricate.
0.027" aluminum 8" face drip edge stock size varies from 11.75" to 12". Assume roof dimension to be 0.25" shorter than the specified 3.625" at 3.375" total.

Specifications

  • Material: 0.027" Aluminum
  • 10' Lengths
  • Made to Order
  • Made in the USA
(H) Nominal SizeMaterial(A) Roof(B) Face(C) Kick(D) HemStock (Total Material)
1.5"Copper, Freedom Gray, Lead Coated Copper2.125"1"0.5"0.375"4"
1.5"Aluminum, Steel, Galvalume and Stainless Steel2.125"1"0.5"0.375"4"
3"Copper, Freedom Gray, Lead Coated Copper2.625"2.5"0.5"0.375"6"
3"Aluminum, Steel, Galvalume and Stainless Steel2.625"2.5"0.5"0.375"6"
4"Copper, Freedom Gray, Lead Coated Copper2.825"3.5"0.5"0.375"7.2"
4"Aluminum, Steel, Galvalume and Stainless Steel3.625"3.5"0.5"0.375"8"
6"Copper, Freedom Gray, Lead Coated Copper2.625"5.5"0.5"0.375"9"
6"Aluminum, Steel, Galvalume and Stainless Steel3.225"5.5"0.5"0.375"9.6"
8"Copper, Freedom Gray, Lead Coated Copper3.625"7.5"0.5"0.375"12"
8"Aluminum, Steel, Galvalume and Stainless Steel3.625"7.5"0.5"0.375"12"

All dimensions are approximate with ~1/8" tolerance.

Ordering Instructions
  • 1 - Pick your material. For other materials navigate back to Edge Metal.
  • 2.0 - Pick your dimensions. These are provided in the chart below.
  • 2.1 - Custom dimensions: Pick the appropriate selection for the amount of stock material needed.
    Example: If adding all dimensions of your custom profile (A+B+C+D) equals 11.5", you'll pick the next size up, for example, 12" stock. Provide dimensions for A, B, C and D (if hem is present) on field 5.
  • 3 - Hem. The hem is the folded portion after the kick. If you select "No hem", the material that is used for this portion would be added to the roof portion.
    Example: A 1.5" profile in copper has a 0.375" hem, which would be added to the roof dimension (A). (A) would become 2.5" (2.125" +0.375").
  • 4 - Roof pitch. Select 0 for no pitch / 90° standard angle / flat roof, or the appropriate / closest pitch. The roof pitch is determined by the rise over the run.
    Example: If for every horizontal 12" your roof rises 6", you have a pitch 6.
  • 5 - This is where you'll enter dimensions for fields A, B, C and D if a custom profile was selected on field 2, otherwise leave blank.
  • 6 - If you prefer to email a sketch you can use this field, otherwise, leave blank.
Submittals & Downloads
Color and Material Options
0.027" Aluminum Flashing Metal Options
Black 0.027

Black

Dark bronze 0.027

Dark Bronze

Musket Brown 0.027

Musket Brown

Royal brown 0.027

Royal Brown

Almond 0.027

Almond

Linen 0.027

Linen

30° white 0.027

Low Gloss White (30°)

80° white 0.027

High Gloss White (80°)

Other colors, materials and thickness may be available upon request. Colors displayed for reference only.
Please click here for a full selection of colors and materials offered.

Save this product for later