24 Gauge Kynar Steel Drip Edge with Kick

SKU DE0440
$18.79
In stock
1
Product Details

L Shape Roof Drip Edge Flashing Metal - 10' Length

Edge metal used on rubber, tile, slate and shingle roofs. Available in several colors. 24 Gauge Kynar® Steel.

This simple drip edge profile, also known as "baldy cleat" is used on rubber roofs, slate and shingle roofs. It can be used to help direct water towards a gutter for example.
The name drip edge comes from the kick portion of this profile, at the very bottom, responsible for kicking the water away from the fascia board. That portion is essentially a drip edge.
Other common names for our drip edge profiles include 2"x2" drip edge, 3"x3" drip edge, etc.
You may order custom profiles through this page, browse our store for other profiles or send us an email for a quote on something even more intricate.

Specifications

  • Material: 24 Gauge Kynar Steel
  • 10' Lengths
  • Made to Order
  • Made in the USA
(H) Nominal Size Material (A) Roof (B) Face (C) Kick (D) Hem Stock (Total Material)
1.5" Copper, Freedom Gray, Lead Coated Copper 2.125" 1" 0.5" 0.375" 4"
1.5" Aluminum, Steel, Galvalume and Stainless Steel 2.125" 1" 0.5" 0.375" 4"
3" Copper, Freedom Gray, Lead Coated Copper 2.625" 2.5" 0.5" 0.375" 6"
3" Aluminum, Steel, Galvalume and Stainless Steel 2.625" 2.5" 0.5" 0.375" 6"
4" Copper, Freedom Gray, Lead Coated Copper 2.825" 3.5" 0.5" 0.375" 7.2"
4" Aluminum, Steel, Galvalume and Stainless Steel 3.625" 3.5" 0.5" 0.375" 8"
6" Copper, Freedom Gray, Lead Coated Copper 2.625" 5.5" 0.5" 0.375" 9"
6" Aluminum, Steel, Galvalume and Stainless Steel 3.225" 5.5" 0.5" 0.375" 9.6"
8" Copper, Freedom Gray, Lead Coated Copper 3.625" 7.5" 0.5" 0.375" 12"
8" Aluminum, Steel, Galvalume and Stainless Steel 3.625" 7.5" 0.5" 0.375" 12"

All dimensions are approximate with ~1/8" tolerance.

Ordering Instructions
  • 1 - Pick your material. For other materials navigate back to Edge Metal.
  • 2.0 - Pick your dimensions. These are provided in the chart below.
  • 2.1 - Custom dimensions: Pick the appropriate selection for the amount of stock material needed.
    Example: If adding all dimensions of your custom profile (A+B+C+D) equals 11.5", you'll pick the next size up, for example, 12" stock. Provide dimensions for A, B, C and D (if hem is present) on field 5.
  • 3 - Hem. The hem is the folded portion after the kick. If you select "No hem", the material that is used for this portion would be added to the roof portion.
    Example: A 1.5" profile in copper has a 0.375" hem, which would be added to the roof dimension (A). (A) would become 2.5" (2.125" +0.375").
  • 4 - Roof pitch. Select 0 for no pitch / 90° standard angle / flat roof, or the appropriate / closest pitch. The roof pitch is determined by the rise over the run.
    Example: If for every horizontal 12" your roof rises 6", you have a pitch 6.
  • 5 - This is where you'll add dimensions for fields A, B, C and D if a custom profile was selected on field 2, otherwise leave blank.
  • 6 - If you prefer to email a sketch you can use this field, otherwise, leave blank.
Submittals & Downloads
Color and Material Options
0.032" Kynar® Aluminum and 24 Gauge Galvanized Steel Common Roof Edge Metal and Flashing Metal Color Options
Black kynar aluminum

Black Aluminum

Matte black kynar steel

Matte Black Steel

Black kynar aluminum and galvanized steel

Charcoal

Dark bronze aluminum and galvanized steel

Dark Bronze

Medium bronze aluminum and galvanized steel

Medium Bronze

Almond aluminum and galvanized steel

Almond

Stone white aluminum and galvanized steel

Stone White

Bone white aluminum and galvanized steel

Bone White

Save this product for later