24 Gauge Kynar Steel T-Style Locking Drip Edge with Kick

SKU RE0640
In stock
Product Details
Brand: K&M Sheet Metal
Shipping: This Item Requires a Skid and Freight Shipping.
Freight Delivery: Customer is responsible for unloading materials from the truck. *Residential delivery may be limited. Please Call before placing and order if your delivery address is difficult for a Semi-Truck to get to.

T Shape Roof Locking Drip Edge Flashing Metal - 10' Length

Edge metal used on rubber, tile, slate, shingle and metal roofs. 24 Gauge Kynar Galvalume Steel. Available in several colors.

This simple drip edge profile, also known as "t-style" is used on any type roofing, but is a requirement for metal roofs due to its overhang which is used to secure metal roof panels.
This style of drip edge is a preferred choice for many roofers because the overhang helps with directing water away from the vertical portion of the drip edge, minimizing the risk of the water going back against the fascia.
The name drip edge comes from the kick portion of this profile, at the very bottom, responsible for kicking the water away from the fascia board. That portion is essentially a drip edge.
Another common name for this drip edge profile is "metal roofing drip edge".
This may be ordered as an angled drip edge or flat. A flat drip edge will also work on an angled roof, except "B" will not sit up against the fascia, it will be perpendicular to the roof. Although this may not be ideal, if this is being placed on both a rake edge along with a gable it will make both pieces line up as far as height goes. Otherwise, if the rake edge metal is manufactured at an angle, it will need to have a taller "B" dimension to line up with the gable drip edge.
You may order custom profiles through this page, browse our store for other profiles or send us an email for a quote on something even more intricate.


  • Material: 24 Gauge Kynar Steel
  • 10' Lengths
  • Made to Order
  • Made in the USA
(H) Nominal SizeMaterial(A) Roof(B) Face(C) Kick(D) Hem(E) Overhang(F)Stock (Total Material)
1.5"Copper, Freedom Gray, Lead Coated Copper2.125"1"0.5"0.375"1"3.125"6"
1.5"Aluminum, Steel, Galvalume and Stainless Steel2.125"1"0.5"0.375"1"3.825"6"
2"Copper, Freedom Gray, Lead Coated Copper2.625"1.5"0.5"0.375"1"3.125"7.2"
2"Aluminum, Steel, Galvalume and Stainless Steel2.625"1.5"0.5"0.375"1"4.625"8"

All dimensions are approximate with ~1/8" tolerance.

Ordering Instructions
  • 1 - Pick your material. For other materials navigate back to Edge Metal.
  • 2.0 - Pick your dimensions. These are provided in the chart below.
  • 2.1 - Custom dimensions: Pick the appropriate selection for the amount of stock material needed.
    Example: If adding all dimensions of your custom profile (B+C+D+E+F) equals 6.5", you'll pick the next dimension up, in this case 7.2" or 8" depending on the material.
  • 3 - Hem. The hem is the folded portion after the kick. If you select "No hem", the material that is used for this portion would be added to the roof portion.
    Example: A 1.5" profile in copper has a 0.375" hem, which would be added to the roof dimension (F). (F) would become 3.5" (3.125" +0.375").
  • 4 - Roof pitch. Select 0 for no pitch / 90° standard angle / flat roof, or the appropriate / closest pitch. The roof pitch is determined by the rise over the run.
    Example: If for every horizontal 12" your roof rises 6", you have a pitch 6.
  • 5 - This is where you'll enter dimensions for fields B, C, D, E and F if a custom profile was selected on field 2, otherwise leave blank.
  • 6 - If you prefer to email a sketch you can use this field, otherwise, leave blank.
Submittals & Downloads
Color and Material Options
Pac Clad Standard 0.032" Kynar® Aluminum and 24 Gauge Galvanized Steel Common Roof Edge Metal and Flashing Metal Color Options
Black kynar aluminum

Black Aluminum

Matte black kynar steel

Matte Black Steel

Black kynar aluminum and galvanized steel

Charcoal Aluminum Steel

Dark bronze aluminum and galvanized steel

Dark Bronze Aluminum Steel

Medium bronze aluminum and galvanized steel

Medium Bronze Aluminum Steel

Copper penny aluminum and galvanized steel

Copper Penny Aluminum Steel

Almond aluminum and galvanized steel

Almond Aluminum Steel

Bone white aluminum and galvanized steel

Bone White Aluminum Steel

Atas Standard 0.032" Kynar® Aluminum and 24 Gauge Galvalume Steel Common Roof Edge Metal and Flashing Metal Color Options
Kynar Black aluminum and steel

Black Aluminum Steel

Kynar Charcoal Grey aluminum and steel

Charcoal Grey Aluminum Steel

Kynar Classic Bronze aluminum and steel

Classic Bronze Aluminum Steel

Kynar Medium Bronze aluminum and steel

Medium Bronze Aluminum Steel

Kynar Coppertone Bronze aluminum and steel

Coppertone Aluminum Steel

Kynar Matte Almond aluminum and steel

Almond Aluminum Steel

Kynar Bone White aluminum and steel

Bone White Aluminum Steel

Other colors, materials and thickness may be available upon request. Colors displayed for reference only.
Please click here for a full selection of colors and materials offered.

Save this product for later