Titebond WeatherMaster Metal Roof Sealant

SKU TBW001
$7.95
In stock
1
Product Details

Titebond WeatherMaster Metal Roof Sealant

Elastomeric Superior Polymer Sealant

Titebond WeatherMaster Metal Roof Sealant is a premium-grade, superior polymer formula that offers unbeatable adhesion to all metals including Kynar™ coated metals, aluminum, galvanized steel, copper and most common building materials. It can be extruded in extreme temperatures, remains permanently flexible and will not shrink, adheres well to wet and damp surfaces and is dust and dirt resistant.

Please contact the manufacturer directly with questions about this product. Other colors not for sale can be ordered via special order.

Specifications

  • Ideal For: Sealing Metal Roofs, Windows, Doors, Siding, Gutters And Vents.
  • Seals: Kynar™ Coated Metals, Aluminum, Galvanized Steel, Copper, Pvc, Wood, Concrete, Masonry, Stucco, Wall Panels, Vinyl, Glass, Plastic, Siding, Flashing, Sheet Metal And Most Common Building Materials.
  • Outperforms silicone, tripolymer and urethane sealants
  • Applies in extreme weather conditions
  • Joint movement capability ± 50%
  • Permanently flexible – Will Not Crack
  • UV-resistant
  • VOC-compliant
  • Compatible with all types of foam
  • Approved for use on buildings in both Miami-Dade county and throughout the country

Applications

  • Sealing & Glazing
  • HVAC/R
  • Plumbing
  • Roofing
  • Kitchen And Bath
  • Countertops
  • Sanitary Seals
  • Precast Concrete
  • Transportation Seals
  • Marine Cabins
  • Appliance Trim
  • Interior/Exterior
  • Above Grade

Application Guidelines
APPLICATION TEMPERATURE: Above 0°F (-18°C)
SERVICE TEMPERATURE RANGE: -75°F to 212°F (-59°C to 100°C) white & colors, -40°F to 350°F (-40°C to 177°) translucent
METHOD OF APPLICATION: Cartridge/caulking gun, bulk/sausage gun
TOOLING TIME: For a 1/4" bead, approximately 10-15 minutes, depending on temperature and humidity.
APPLICATION DIRECTIONS: 1. Surfaces must be clean and free of any material that may prevent adequate adhesion. 2. Remove nozzle, cut tip of the nub and puncture inner foil seal. 3. Screw nozzle onto cartridge and cut tip on slant for 1/4" to 3/8" bead and place in cartridge gun. 4. Force sealant into clean joint. Always apply sealant in bead form. To ensure neat sealant lines, mask areas adjacent to joints. Once sealant is dry to the touch and does not transfer, remove masking tape. No tooling is required. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability.
SUBSTRATE COMPATIBILITY: Excellent adhesion to Kynar™ coated materials. For use on polycarbonate, check with polycarbonate supplier on compatibility. Do not apply Metal Roof Translucent to polycarbonate due to solvent cracking. For questions, please call our Help Line at 1-800-347-4583.
PAINTING: Sealant is intended for exterior use. If used indoors, sealant may need to be painted. Painting may occur one hour after application with a water-based (latex-based) paint. For other paint types, a compatibility test is recommended.
CLEANUP: Clean uncured material with acetone or isopropyl alcohol. After curing, excess sealant must be cut or scraped away. Follow solvent vendor’s precautions when using solvents.
COVERAGE (9.5 oz. CARTRIDGE): 1/8” Bead - 116', 1/4" Bead - 29', 3/8" Bead - 13', 1/2" Bead - 7'
LIMITATIONS: Not designed for continuous submersion or use below the waterline. Air, sealant and surface temperature should be above 0°F. Copper should be coated to eliminate oxidation before sealing. Sealant is intended for exterior use. If used indoors, sealant may need to be painted. Painting may occur one hour after application with a water-based (latex-based) paint. For other paint types, a compatibility test is recommended. Once sealant is applied, do not wipe with solvents. DO NOT TOOL - DO NOT SMEAR. It is highly recommended to use backing material. Application of sealant at high temperatures may cause the sealant to sag in some applications. Do not apply Metal Roof Translucent to polycarbonate due to solvent cracking, for Clear and Colors check with polycarbonate supplier on compatibility. Sealant releases methanol during cure, check with substrate manufacturer for compatibility. For best results, store in a dry location at or below 75°F.
TYPE Elastomeric superior polymer
REACTIVE VOC <50 g/L (<2%) white/colors/clear, <50 g/L (<1.5%) translucent
SOLIDS 100%
VISCOSITY 102,000
WEIGHT PER GALLON 11.7 lbs. white & colors, 8.41 lbs. translucent
FREEZE / THAW STABILITY Stable
FLASHPOINT Solvent free/Not applicable
STORAGE LIFE 24 months in a dry location at or below 75°F (24°C)
EXCEEDS ASTM C920 Type S Grade NS Class 50 Use T, NT, M, A & G. Federal Specification TT-S-00230C Type II Class A.
MEETS REQUIREMENTS CAN/CGSB-19 13-M87 Classification MCG-2-25-A-N
Colors
Color Name Product Code Image Pad Clad™ Metal Match
BRONZE 61341 AGED BRONZE (REV. 9/2019)
GREEN 61751 AGED COPPER (REV. 9/2019)
BEIGE 61591 ALMOND (REV. 9/2019)
GRAY 62401 ANODIC CLEAR (REV. 9/2019)
GREEN 61881 ARCADIA GREEN (REV. 9/2019)
BLUE 62221 AWARD BLUE (REV. 9/2019)
BLUE 62291 BERKSHIRE BLUE (REV. 9/2019)
WHITE 61021 BONE WHITE (REV. 9/2019)
RED 61561 BURGUNDY (REV. 9/2019)
BRONZE 61391 BURNISHED SLATE (REV. 9/2019)
RED 61461 CARDINAL RED (REV. 9/2019)
CLAY 62081 CHAMPAGNE (REV. 9/2019)
GRAY 62501 CHARCOAL (REV. 9/2019)
GRAY 62491 CITYSCAPE (REV. 9/2019)
RED 61441 COLONIAL RED (REV. 9/2019)
MISC - COPPER 62621 COPPER PENNY (REV. 9/2019)
BRONZE 61361 DARK BRONZE (REV. 9/2019)
GREEN 61831 EVERGREEN (REV. 9/2019)
GREEN 61831 FOREST GREEN (REV. 9/2019)
CLAY 62071 GRANITE (REV. 9/2019)
BRONZE 61381 GRAPHITE (REV. 9/2019)
GREEN 61781 HARTFORD GREEN (REV. 9/2019)
GREEN 61791 HEMLOCK GREEN (REV. 9/2019)
GREEN 61761 HUNTER GREEN (REV. 9/2019)
BLUE 62301 INTERSTATE BLUE (REV. 9/2019)
BROWN 61141 MANSARD BROWN (REV. 9/2019)
BLACK 61121 MATTE BLACK (STEEL) (REV. 9/2019)
BRONZE 61351 MEDIUM BRONZE (REV. 9/2019)
BLACK 61121 MIDNIGHT BRONZE (REV. 9/2019)
BLUE 62201 MILITARY BLUE (REV. 9/2019)
GRAY 62511 MUSKET GRAY (REV. 9/2019)
GREEN 61881 PATINA GREEN (REV. 9/2019)
BEIGE 61701 SANDSTONE (REV. 9/2019)
BEIGE 61621 SIERRA TAN (REV. 9/2019)
GRAY 62401 SILVER (REV. 9/2019)
GRAY 62401 SILVERSMITH (REV. 9/2019)
BLUE 62251 SLATE BLUE (REV. 9/2019)
GRAY 62421 SLATE GRAY (REV. 9/2019)
WHITE 61031 STONE WHITE (REV. 9/2019)
GREEN 61841 TEAL (REV. 9/2019)
RED 61451 TERRA COTTA (REV. 9/2019)
GRAY 62471 WEATHERED ZINC (REV. 9/2019)
GRAY 62491 ZINC (REV. 9/2019)
Submittals & Downloads
Save this product for later