24 Gauge Galvalume Drip Edge with Kick

SKU DE0461
$14.54
In stock
1
Product Details

L Shape Roof Drip Edge Flashing Metal - 10' Length

Edge metal used on rubber, slate and shingle roofs. 24 Gauge Galvalume.

This simple drip edge profile, also known as "baldy cleat" is used on rubber roofs, slate and shingle roofs. It can be used to help direct water towards a gutter for example.
The name drip edge comes from the kick portion of this profile, at the very bottom, responsible for kicking the water away from the fascia board. That portion is essentially a drip edge.
Other common names for our drip edge profiles include 2"x2" drip edge, 3"x3" drip edge, etc.
You may order custom profiles through this page, browse our store for other profiles or send us an email for a quote on something even more intricate.

Specifications

  • Material: 24 Gauge Galvalume / Acrylume
  • 10' Lengths
  • Made to Order
  • Made in the USA
(H) Nominal Size Material (A) Roof (B) Face (C) Kick (D) Hem Stock (Total Material)
1.5" Copper, Freedom Gray, Lead Coated Copper 2.125" 1" 0.5" 0.375" 4"
1.5" Aluminum, Steel, Galvalume and Stainless Steel 2.125" 1" 0.5" 0.375" 4"
3" Copper, Freedom Gray, Lead Coated Copper 2.625" 2.5" 0.5" 0.375" 6"
3" Aluminum, Steel, Galvalume and Stainless Steel 2.625" 2.5" 0.5" 0.375" 6"
4" Copper, Freedom Gray, Lead Coated Copper 2.825" 3.5" 0.5" 0.375" 7.2"
4" Aluminum, Steel, Galvalume and Stainless Steel 3.625" 3.5" 0.5" 0.375" 8"
6" Copper, Freedom Gray, Lead Coated Copper 2.625" 5.5" 0.5" 0.375" 9"
6" Aluminum, Steel, Galvalume and Stainless Steel 3.225" 5.5" 0.5" 0.375" 9.6"
8" Copper, Freedom Gray, Lead Coated Copper 3.625" 7.5" 0.5" 0.375" 12"
8" Aluminum, Steel, Galvalume and Stainless Steel 3.625" 7.5" 0.5" 0.375" 12"

All dimensions are approximate with ~1/8" tolerance.

Ordering Instructions
  • 1 - Pick your material. For other materials navigate back to Edge Metal.
  • 2.0 - Pick your dimensions. These are provided in the chart below.
  • 2.1 - Custom dimensions: Pick the appropriate selection for the amount of stock material needed.
    Example: If adding all dimensions of your custom profile (A+B+C+D) equals 11.5", you'll pick the next size up, for example, 12" stock. Provide dimensions for A, B, C and D (if hem is present) on field 5.
  • 3 - Hem. The hem is the folded portion after the kick. If you select "No hem", the material that is used for this portion would be added to the roof portion.
    Example: A 1.5" profile in copper has a 0.375" hem, which would be added to the roof dimension (A). (A) would become 2.5" (2.125" +0.375").
  • 4 - Roof pitch. Select 0 for no pitch / 90° standard angle / flat roof, or the appropriate / closest pitch. The roof pitch is determined by the rise over the run.
    Example: If for every horizontal 12" your roof rises 6", you have a pitch 6.
  • 5 - This is where you'll add dimensions for fields A, B, C and D if a custom profile was selected on field 2, otherwise leave blank.
  • 6 - If you prefer to email a sketch you can use this field, otherwise, leave blank.
Submittals & Downloads
Color and Material Options
Material Options for Roof Flashing Metal and Edge Metal
Copper

Copper

Copper

Pre Patina Copper

Freedom gray

Freedom Gray®

Galvalume

Galvalume

Lead coated copper

Lead Coated Copper

Stainless Steel

Stainless Steel

Zinc

Zinc

Save this product for later