Round copper ridge cap for slate roofing

Roof Flashing Metal

More Information
Galvalume drip edge for shingle roof

Drip Edge Metal

More Information
Stainless steel masonry through wall flashing

Masonry Flashing Metal

More Information
Cornice edge metal miter - galvalume

Cornice Flashing Metal

More Information

Masonry Flashing Metal & Roofing Edge Metal

K&M Sheet Metal and Roofing Supply offers a wide range of brake metal, edge metal and flashing metal for the roofing and masonry industry.

We are equipped with machinery such as brakes, shears, CNC lasers and are able to brake / bend metal in 10′ and up to 20′ in lengths.

We offer all standard profiles needed for your roofing job, or masonry job and can manufacture custom profiles and shapes as well, including curved /radius pieces.

What profiles of edge metal and flashing metal are available?

Edge and Flashing metal are made to order and need to be quoted. Please, contact us for an estimate.

Edge Metal for Rubber, Shingle, Wood and Metal Roofs

K&M Sheet Metal specializes in the custom manufacturing edge metal for flat and pitched roofs.

Baldy Cleat

This profile is commonly shaped like an L with a kick. Some refer to this as a simple drip edge as well.

Cornice

Used to decorate and to act sometimes as gutters at the edge of a building. Learn more.

Drip Edge

This profile is used on the edge of a roof and can have many different profiles and dimensions.

Gravel Stop

This profile is used on the edge of a flat roof, normally filled with gravel, with the intent of not letting water go over it.

Hook Strip / Continuous Cleat

Used to hang any type of edge metal without exposed fasteners. This profile is installed first, then followed by a gravel stop, baldy cleat, parapet cap etc.

J Channel

Normally used for the installation of roof panels, this profile accepts a panel and is used for a ridge cap to hook onto.

Parapet Wall Cap

Caps a parapet wall. Commonly used with hook strip on one side, both, or with a one piece hook strip system.

Ridge Cap

Used on the ridge of a roof. This may be made in certain profiles for shingle roofing, wood roofing, metal and slate roofing.

Scupper Box

Items used to drain water out of a roof, normally into a leader head.

Z Channel

Used on applications much like the J channel, except this is inserted inside a roof panel, making it so the panel does not need to be boxed. This is a much faster installation method, but there are cuts that need to be caulked, which are not present on installations with j channel and boxed panels.

Flashing Metal for Roofs and Masonry

We also specialize in the manufacturing of flashing metal for masonry projects as well as roofs.

Drip Edge for Masonry

A profile used to direct water / moisture away from a building. Normally flat with a kick and sometimes hem.

End Dams

Pre made as separate items, or part of full length items, these are used to seal the end of a part. Normally fabricated in stainless steel then soldered.

Masonry coping caps

Normally flat pieces with kicks on both ends to act as drip edges. Kicks may also feature hems.

Miters

Commonly made as separate pieces for profiles such as drip edge or through wall flashing.

Reglet

Used to counter flash areas. Most commonly used on chimneys. Features a kick / hook area to stay in place.

Step Flashing

Used to counter flash areas. Most commonly used on chimneys. Commonly made out of copper and stainless steel.

Through Wall

Common profile used on brick building to expel any water that has made its way past the bricks.

Window and Door heads

Profiles used on divert any water form the top of a window or door away.

Window and Door Jambs

Profiles used on the installation of windows and doors to direct water away from a structure.

Window and Door Sills

Profiles used to direct any water that made its way behind doors or windows away.

Edge Metal and Flashing Metal Pictures

Round copper ridge cap for slate roofing
Round copper ridge cap for slate roofing
Round copper ridge cap for slate roofing
Stainless steel masonry through wall flashing
Stainless steel masonry through wall flashing
Stainless steel masonry through wall flashing
Galvalume drip edge for shingle roof
Galvalume drip edge for shingle roof
Custom galvalume cornice edge metal
Custom galvalume cornice edge metal

FAQs – Frequently Asked Questions

Are any pre made / standard profiles available?

At this moment all profiles are custom made to order.

How are orders shipped?

Normally on a pallet / crate.

What lengths are available?

Pretty much anything up to 20', depending on stock availability (coil). 10' / 20' are standard lengths. There is an upcharge for waste.

K&M is located in Durham, NC in the RDU Area. Local pickups are available. We supply homeowners and contractors alike in NC, TN, KY, SC, GA and VA as well as shipping orders all over the United States. Discounts may be available for bulk orders.

0.027″ Aluminum Edge and Flashing Metal Color Options
Black 0.027

Black

Dark bronze 0.027

Dark bronze

Musket Brown 0.027

Musket Brown

Royal brown 0.027

Royal brown

Almond 0.027

Almond

Linen 0.027

Linen

30° white 0.027

Low Gloss (30°) White

80° white 0.027

High Gloss (80°) White

The most popular flashing and edge metal colors in 0.027″ aluminum are Dark Bronze and High Gloss White
Click here for a full list of 0.027″ aluminum colors

0.032″ Kynar Aluminum and 24 Gauge Galvanized Steel Edge and Flashing Metal Color Options
Black kynar aluminum and galvanized steel

Matte black

Dark bronze aluminum and galvanized steel

Dark bronze

Medium bronze aluminum and galvanized steel

Medium bronze

Almond aluminum and galvanized steel

Almond

Stone white aluminum and galvanized steel

Stone white

Bone white aluminum and galvanized steel

Bone white

The most popular flashing and edge metal colors in Galvanized Steel and Aluminum Kynar are Bone White and Dark Bronze
Click here for a full list of Kynar metal colors

Other Material Options for Edge Metal and Flashing Metal
Copper

Copper

Freedom gray

Freedom gray

Galvalume

Galvalume

Galvanized steel

Galvanized steel

Lead coated copper

Lead coated copper

Stainless steel

Stainless steel

Zinc

Zinc

Copper is the most popular metal for roof edge metal. It is offered in 16 oz and 20 oz.
Freedom Gray (zinc / tin coated copper) is offered in 16 oz and 20 oz.
Galvalume Plus is offered in 24 gauge.
Galvanized steel is commonly offered in 24 gauge.
Lead Coated Copper is offered in 16 oz and 20 oz.
Stainless steel is commonly offered in 24 and 26 gauge 2B 304.
Zinc is offered in 0.7 mm and 0.8 mm with a raw finish.

Other colors, materials and thickness may be available upon request.
Please click here for a full selection of colors and materials offered.

No downloads available.